www.vtechphones.com 15

Basic operation
Basic operation

Intercom call

This feature allows conversation between han dsets.
• For 6051, press INT on a handset and i ts screen displays NUMBEr.
Use the keypad to select a destination handset. The screen of the originating
handset displays CaLLINg HaNDSE T X.
For 6041/6044, press INT on a handset and its scree n displays
CaLLINg HaNDSET X.
• The destinatio n handset rings and its screen displays CaLLINg FroM:
HaNDSET X.
Press /FLaSH or on the destination handset to answer the call.
• To end an intercom call, press o FF/CLEar on the handset or by placing
the handset back on the telephone base or ch arger.

Multiple handset use

While on a call, the person on the other hand set can join the conversation.
• Press /FLaSH or to join the conversation. (Only two handsets can
join the conference conversation at the s ame time.)
• Press oFF/CLEar, or place the handset in the telephone base or charger
to drop out of the call. The external call w ill not be term inated until both
handsets hang up.

answer an external call during an intercom call

There will be an alert tone to sig nify an incoming external call during an
intercom call and the screen displays CaLL waI TINg.
Disconnect the intercom call by pres sing oFF/CLEar and the handset wi ll ring.
Press
/FLaSH, or any dialing keys (0-9, * or #) to answer t he
incoming call.
coNf 00:02:48
cAllING froM:
HANdSet X
cAllING
HANdSet X