VTech 900I Changing Channels, Temporary,Tone, Programming the Ringer Type, Turning Off The Ringer

Changing Channels

In the unlikely event you notice interference when using your handset, press CHAN to switch to a clear channel. Using this key to change channels is only available when you are on acall. When the call is on HOLD or if you are in STANDBY mode, the CHAN key is inactive.

PRESS CHAN

IF YOU HEARD

NOISE IN A

CONVERSATION

Temporary,Tone

Ifyou have rotary(dial-pulse)telephone service, (TONUPULSE switch is set to PULSE),thisfeatureallowsyou toenter special codes and tones to operate answering machines, use electronic bankingservices,callingcards, or other special services.

First, dial the call normally. Then activate the Temporary Tone feature by pressingTONE (the key). You can then pressthe numbersorsymbolsyou need, and your phone will send the proper signals.

TEMPORARY TONE

OPERATION

1.DlAL YOUR CALL

eg. @ @ ......

2.PRESS @

3.PRESS THE NUMBERS or SYMBOLS YOU NEED

To endthe call, press OFF or place the handset back in the base. The phone will automaticallygo backto rotary(dial- pulse) service.

If you havetouch-tone service, (TONE1 PULSE switch set to TONE),just enter the codes normally. Thisfeature is only for rotary service telephone lines.

Programming the Ringer Type

The handset ringer is capable of four different types of ringing tones. The following sections detail howto change the different tones and to turn off the ringer on the handset.

To program,the handset must be OFF.

To select a different ringer type do the following:

Press PR G

Press the # key.

*Press a key 1..4 to select a ringer type.

Press OFF to exit.

PROGRAMMING THE

RINGER TYPE

1.PRESS

2.PRESS

3.SELECT RINGER TYPE

@@

4. PRESS TO EXIT

Turning Off The Ringer

To turn off the ringer on the handset, do the following:

Press PRG

Press the # key

Press 5 to turn off the ringer

Press OFF to exit

To turn ringer on again, see

Programmingthe Ringer Type.

TURNING OFF

THE RINGER

4. PRESS TO EXlT

Checking the Ringer

To check the ringer which is currently programmed, do the following:

Press PRG

Press the # key

Press 0

Press OFF to exit

The phone will ring once to show the ringer selected.

CHECKING THE

RINGER TYPE

1.PRESS

2.PRESS 3.PRESS @

4. PRESS TO EXlT

Memory Dialing

The VTech 900i can store up to 10 different phone numbers that you can dial just by pressing MEM and one of the number keys.

To Store a Number into Memory The handset must be OFF.

1.Press PRG

2.Press the number of the memory location you wish to store the number in (0..9).

3.Usingthe dial pad, dial the number you want to store. The number can be up to 16 digits long.

4.PressMEM. That assignsthephone number to the key you selected.

STORE NUMBER

INTO MEMORY

THE HANDSET MUST BE OFF

2.PRESS @..... @

3.DlAL YOUR NUMBER

.........