VTech 900I Frequency Control, Transmit Frequency, Receive Frequency, Nominal Effective Range

IC (Industry Canada)

This telephone is registered for use in Canada.

Notice: The lndustry Canada label identifies certified equipment. This certificationmeans that the equipment meets certain telecommunications network, protective, operational and safety requirements, lndustry Canada does not guarantee the equipment will operate to the user'ssatisfaction.

Before installingthis equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of connections. The customer should be aware that compliance with the above conditionsmay not preventdegradation of service in some situations.

Repairs to certified equipment should be made by an authorized Canadian maintenancefacility designated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunicationscompanycauseto request the user to disconnect the equipment.

Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas.

Caution: Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority, or electrician, as appropriate.

The LoadNumber (LN)assignedto this device denotes the percentage of the total loadto beconnectedto atelephone loop which is used by the device to prevent overloading. The termination on a loop may consist of any combination of devices subject only to the requirement that the total of the load numbers of all the devices does not exceed 100.

This device complies with RSS-210of lndustry Canada. Operation is subject to the following two conditions: (1) this device may not cause interference,and

(2)this device must accept any interference,includingintederencethat may cause undesired operation of the device.

FREQUENCY CONTROL

Crystal Controlled Dual PLL Synthesizer

TRANSMIT FREQUENCY

Handset : 925.05MHzto927.75 MHz (Allten channelswithinthis range)

Base : 902.3 MHz to 905.0 MHz (Alltenchannelswithinthis range)

RECEIVE FREQUENCY

Handset : 902.3 MHz to 905.0 MHz (Allten channelswithinthis range)

Base : 925.05MHzto927.75 MHz (Allten channelswithinthis range)

NOMINAL EFFECTIVE RANGE

Maximum power allowed by FCC and IC. Actual operating range may vary according to environmental conditions at the time of use.

The range quoted for this phone is based on open field measurements under W condmms.

WEIGHT

Handset : 345 grams (with battery)

Base : 1075 grams(with AC adapter)

SIZE

Handset : 20.0cm x 6.2cm x 4.3cm (L x W x T) maximum (antenna excluded)

Base : 22.0cm x 19.5cm x 6.lcm (L x W x T) maximum (antenna excluded)

POWER REQUIREMENTS

Handset : Self-contained nickel- cadmium rechargeable battery supply, 6.OV

nominal, 6OOmAh capacity.

Power Adapter12VDCQ500mA

AND MAY CHANGE WITHOUT NOTICE.