VTech 917ADX manual Phoneled, Low Batt/Mute Led, Ringer, Tion and Operating Instruc

PHONELED -

Glows steadily when Handset is in use.

Flashes slowly when a call is on HOLD.

1 Flashes rapidly when Handset is in Pro- gram (PRG) mode.

Flashes in cadence with an incoming ring.

INT.COM LED .'

Glows steadily when the INT.COM key is pressed on the Handset

LOW BATT/MUTE LED. . '

Flashes to signify that the Handset bat- tery pack needs recharging.

Glows steadily when the MUTE key is pressed during a call.

FE A T ' U ' RE S

PHONE (FLASH) Key

Press this key to get a dial tone or an- swer an incoming call.

During a call, press PHONE to FLASH the line. This feature is used in conjunc- tion with services such as Call Waiting.

- - - - - ---

INT.COM Key

Press this key to initiate two-way, inter- nal communication between the Handset and Base Unit. The Base Unit will emit two beeps, and will then automatically enter lntercom mode. The party at the Base Unit does not need to press any key to activate this feature, when it is ini- tiated fromthe Handset.

OFF Key

- ~ ---

Press this key to end a call, exit from In- tercom (INT.COM) mode or Program (PRG) mode.

HOLD Key

Press this key to temporarily suspend conversation without terminating the call. With a call on HOLD, you can:

lntercom the ~ a s Unite

Transfer the call to the Base Unit

Return to the call by pressing PHONE.

NOTE:

If you have placed a call on HOLD and

want to hang up: Press PHONE to

return to the call, then press OFF, or

place the Handset in the Base Unit.

CHANNEL (CHAN) Key

If you are experiencing noise or interfer- ence during a call, press the CHAN key to change to the next free channel.

NOTE: You may need to press CHAN more than once to find an interference- free channel.

--

MUTE Key

Press this key to mute the Handset mi- crophone during a conversation. You will still be able to hear the other party, but they cannot hear you.

Press MUTE again to resume two-way conversation.

MEMORY (MEM) Key

Press this key to enter MEMORY DIAL- ING mode.

The sequence for dialing a phone num- ber stored in memory is: Press PHONE, MEM, Memory Location (0-9).

PROGRAMIPRIVACY (PRGIPRV) Key

With the Handset OFF, press this key to store phone numbers into MEMORY, as well as programming the Handset

RINGER.

See PROGRAMMING THE RINGER

TYPE, and TO STORE A NUMBER

INTO MEMORY, for details.

During a call, press PRGIPRV to prevent the Base Unit from joining the conversa- tion.

REDIAL Key

When you hear a dial tone, press this key to redial the last phone number dialed on your 917ADX.

The phone number stored in REDIAL can be placed in a MEMORY dial location.

*TONE Key

From the PULSE (Rotary) dialing mode, press this key to switch to TEMPORARY TONE dialing mode.

When the call is ended, the phone will return to PULSE dialing mode.

VOLUME CONTROL SWITCH + s ~ ~ ~ ~ ~ ' ~ ~

Located on the Left edge of the Handset.

Two Settings: H (High) and L (Low).

HEADSET JACK (2.5 mm) ..y r t ~ p'',

Located on Right edge of the Handset.

Plug (optional) Headset into this jack for hands-free operation.

See OPTIONAL HEADSET INSTALLA-

TION AND OPERATING INSTRUC-

TIONS for more information.