Answering system operation
Answering system and voicemail
Your telephone has separate indicators for two different types of voice messages: those left on its
•If 
and New voicemail display on the handset, your telephone service provider is indicating that it has new voicemail for you. To listen to your voicemail, you typically dial an access number provided by your telephone service provider, followed by a security code or PIN.
•If 
and XX new messages display on the handset and the message window on the telephone base flashes, there are new messages recorded on the 
/PLAY/STOP on the telephone base (page 27) to listen.
Some service providers bundle or combine multiple services like voicemail and call waiting, so you may not be aware that you have voicemail. To check what services you have and how to access them, contact your telephone service provider.
To use your voicemail service rather than your answering system, turn off your answering system. To use your answering system rather than your voicemail service, contact your telephone service provider to deactivate your voicemail service. You can also use your telephone answering system and voicemail together by setting your
Set your answering system to answer calls at least two rings earlier than your voicemail is set to answer. For example, if your voicemail answers after six rings, set your answering system to answer after four rings. Some voicemail providers may program the delay before answering calls in seconds instead of rings. In this case, allow six seconds per ring when determining the appropriate setting.
Message capacity
The answering system can record and store up to 99 messages. Each message can be up to three minutes in length (see page 24 to change the length). The total storage capacity for the announcement, messages and memos is approximately 11 minutes. The actual recording time depends on individual message characteristics. Messages remain available for replay until you delete them.
26
