If you need to install your telephone within the same room as other cordless telephones or wireless products, you may need to select a different channel for your router or change the channel on your handset..

This power adapter is intended to be correctly oriented in a vertical

or floor mount position.. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the- table or cabinet outlet

Installation

Telephone base installation

Install the telephone base and the power adapter as shown below.. Choose a location away from any electronic equipment and appliances such as personal computers, computer routers, wireless routers (wireless broadband, wi-fi, or 802.11), television sets, microwave ovens and refrigerators. Avoid excessive heat, cold, dust or moisture..

Plug the connector of the power adapter to the connector jack at the bottom of the telephone base.. Then plug the power adapter into a standard electrical outlet not controlled by a wall switch..

Connect the telephone line cord to the jack at the bottom of the telephone base, and the other end to the wall jack..

If you receive high speed internet through your telephone line (commonly referred to as DSL) and you are experiencing interference during telephone conversations and/or your caller ID features are not functioning properly, install a DSL filter to the telephone line between the telephone base and the telephone wall jack. Contact your DSL service provider for a DSL filter.

To power outlet

AC power adapter

To single-line

telephone jack (RJ11C)

Telephone line cord

DSL filter

 

(optional for DSL users)

www.vtechphones.com

Page 6
Image 6
VTech gz5838 important safety instructions Telephone base installation, To single-line, Telephone jack RJ11C