Speed dial
You can store as many as nine frequently dialed telephone numbers with names (up to 15 characters and 24 digits in each location) into the speed dial memory locations you assign in the handset..
Store a speed dial entry
1..Press PROG..
2..Press 
or 
until the screen displays SPEED DIAL..
3.Press SEL.. The screen displays ENTER
4.Press the key (1 through 9) for the memory location for the new entry.. The screen displays ENTER NAME..
5.Using the chart below, enter up to 15 characters for the name to be stored with the number.. Press 
to backspace and make corrections; press 
to advance or add a space..
6.After entering the name, press SEL or PROG.. The screen displays ENTER NUMBER..
Press
Dial Key Once Twice 3 Times 4 Times 5 Times 6 Times
11
2 | A | B | C | 2 |
|
3 | D | E | F | 3 |
|
4 | G | H | I | 4 |
|
5 | J | K | L | 5 |
|
6 | M | N | O | 6 |
|
7 | P | Q | R | S | 7 |
8 | T | U | V | 8 |
|
9 | W | X | Y | Z | 9 |
00
* | * |
|
|
|
|
|
# | & | ‘ | , | - | .. | # |
www.vtechphones.com
•The entries stored in speed dial memory will be marked 1 through 9 in the telephone directory..
•Press OFF anytime to exit the speed dial mode..
•When the memory is full, the screen displays MEMORY FULL, an error tone sounds and no new entry can be stored until an entry is deleted from the speed dial memory or the telephone directory..
•Take caution when assigning speed dial location numbers in memory.. If the location already has an entry stored, the new entry
will overwrite the existing one.. Be careful not to save over entries you do not wish to delete from memory..
15
Basic operation
