VTech I6768, I6787, i6777 Remote access commands, Commands during playback mode

Answering system operation

Remote access

You can access many features of your answering system remotely from any touch tone telephone. A two-digit security code is required to access the system and the factory default code is 19; see page 29 to change it. To connect remotely:

•Dial your telephone number from any touch tone telephone.

•When the system answers and announces the greeting, enter the two-digit security code.

•After hearing a double beep, enter one of the remote commands in the following table.

•Hang up or press 8 to end the call.

Remote access commands:

Hang up	Saves all messages
1	Plays all messages
2	Plays new messages only
3 (twice)	Deletes all old messages while no message is currently playing.
*5	Plays help menu
5	To stop
*7	Records the outgoing announcement
8	Hang up the call
0	Turns answering system on or off

Commands during playback mode:

3Deletes the message currently playing and announces "Message deleted."

4Repeats the playing message

4 (twice)	Plays the previous message
6	Skips to the next message

•Your memo can be up to four minutes in length.

•If no key is pressed after entering remote access, any new messages will be played automatically.

•Once the new messages have been played, the system will announce the help menu options. If no key is pressed within 20 seconds, the remote access call is automatically disconnected.

Advanced operation

www.vtechphones.com 33