NTI NODEMUX SERIES UNIVERSAL KVM SWITCH
User Name List
The User Name List displays the list of users and provides control for adding new users, changing or assigning user passwords, and changing access rights for any given user. User names may be up to 12 characters long, may not contain spaces, and are not case sensitive. Passwords may be up to 15 characters long, may not contain spaces, and are case sensitive.
Function:
Edit the highlighted user’s System Access rights
Enter Edit Mode to add/change/ remove users
Change the highlighted user’s password
Exit the User Name List and return to previous mode
System Access List
Keystroke:
Ctrl
Ctrl
Ctrl
Esc
+A
+E
+P
The System Access List displays a list of numbers representing the ports so the administrator can change access rights to the ports for the selected user. The user’s name is displayed at the top of the access list. The mouse is used to change access rights by clicking on a given number to toggle a port’s status. A user that has access to a port can connect to that port and control the CPU connected to that port when in Normal Mode.
Function:
Save the changes to the access list and return to previous mode
Exit the System access list without saving and return to previous mode.
Keystroke:
Enter
Esc
User Access Functions
Introduction
The OSD menu enables a user to name the CPUs connected to the NODEMUX and connect to them using that name from a single keyboard and mouse. The OSD is positioned on the user's monitor, displaying 8 CPU names at a time. The screen can be used for switching as well as editing the CPUs’ names. Through the OSD menu, the user can control the NODEMUX to cycle through all modes of operation: COMMAND, SCAN, BROADCAST and NORMAL. Three LEDs on the front panel indicate when these modes are enabled.
OSD Command Mode
In order to control the NODEMUX with the keyboard connected, Command Mode must be enabled. To enter Command Mode
from the keyboard: | Ctrl | + | ~ | (ACCENT |
Press | ` | KEY) | ||
|
|
|
|
19
