NTI NODEMUX SERIES UNIVERSAL KVM SWITCH
When a standard user powers up the system a security screen may appear as setup by the administrator. The user will need to login to the system by following the instructions below for the USER LOGIN. If the user does not know the appropriate user name and password (setup by the administrator), contact the system administrator for this information. Once
User Login Mode
User Login Mode requires a user to login with a user name and password from the list created by the administrator. Access to the functions of the NODEMUX will not be allowed until a user has logged in.
Function:
Adds a character to the user name/password
Removes previous character from the user name/password
Submit user name/password
Exit User Login Mode and return to previous mode. This function is only available if security is not currently active.
Keystroke:
(Type any alphabetical or numeric character) | ||
| ||
| Backspace |
Enter | If the password submitted is incorrect, the user will not be | |
| ||
| able to proceed. | |
Esc | If the password submitted is correct, the user will proceed | |
to the maintenance menu for additional feature options. | ||
| ||
|
|
Additional Modes Available With Security
NOTE: The three modes that follow are only available if the administrator is logged in.
Administration Mode
Administration Mode allows the administrator to use the following functions:
Function:Keystroke:
Configure switch- for application and RS232 communication (not found in legacy NODEMUX)
W
Change the administrator’s password
Enter User Name List Mode
Disable security
C U S
|
|
|
|
|
|
| Figure 18- Administration Mode menu |
Selects the idle time in seconds | T - | - | - | (xxx from 000 to 255. ie. t002 | |||
x | x | x | would set the | ||||
| for 2 seconds. 000 will disable it) | ||||||
Exit Administration Mode and | Esc |
|
|
|
|
|
|
return to previous mode |
|
|
|
|
|
|
16
