Appendix

Troubleshooting

Low battery shows on screen.

Place the handset in the telephone base or charger for recharging.

Completely remove and install the battery again and use it until fully depleted, then recharge the handset in the telephone base or charger for up to 16 hours.

If the above measures do not correct the problem, replace the battery.

The battery does not charge in the handset or the handset battery does not accept charge.

Make sure the handset is placed in the telephone base or charger correctly. The CHARGE light on the handset should be on.

Completely remove and install the battery again, then charge for up to 16 hours.

If the handset is in the telephone base or charger but the CHARGE light on the handset is not on, refer to The charge light on the handset is off below.

If the battery is completely depleted, it may take up to 30 minutes to charge the handset before Low battery appears on the screen (page 6).

Purchase a new battery. Refer to Handset battery on page 61.

The CHARGE light on the handset is off.

Clean the charging contacts on the handset and telephone base each month with a pencil eraser or a dry non-abrasive fabric.

Make sure the power adapter and telephone line cord are plugged in correctly and securely.

Unplug the power adapter. Wait for 15 seconds before plugging it back in. Allow up to one minute for the handset and telephone base to reset.

The telephone does not ring when there is an incoming call.

Make sure the handset ringer volume is not set to the lowest level (page 19) and the telephone base ringer volume is not set to zero (page 19).

Make sure the telephone line cord and power adapter are plugged in properly (page 2).

The handset may be too far from the telephone base. Move it closer to the telephone base.

There may be too many extension phones on the telephone line to allow all of them to ring simultaneously. Unplug some of them.

If other telephones in your home are having the same problem, the problem is in the wiring or telephone service. Contact your telephone service provider.

Other electronic products such as HAM radios and other DECT phones can cause interference with your cordless phone. Try installing your phone as far away as possible from these types of electronic devices.

Test a working telephone at the telephone wall jack. If another telephone has the same problem, the problem is in the telephone wall jack. Contact your telephone service provider.

The telephone line cord may be defective. Install a new telephone line cord.

Completely remove and install the battery again and place the handset in the telephone base or charger.

Wait for the handset to synchronize with the telephone base. Allow up to one minute for this to take place.

67

Page 71
Image 71
VTech LS6325-2, IS6100, LS6375-3 user manual Low battery shows on screen, Charge light on the handset is off

LS6375-3, LS6325-2, IS6100 specifications

The VTech IS6100 is an innovative cordless phone system that caters to the modern user's needs while providing exceptional functionality and convenience. At the core of its design is a blend of advanced technology and user-friendly features that make it a standout choice for home and office use.

One of the defining features of the VTech IS6100 is its DECT 6.0 technology, which ensures secure, interference-free communication. This technology not only enhances voice clarity but also extends the range of the phone, allowing users to communicate seamlessly throughout their homes or offices without worrying about signal loss. The system comes with a range of up to 1,000 feet outdoors and about 300 feet indoors, making it a practical choice for larger spaces.

The IS6100 is equipped with a digital answering system that has a recording time of up to 14 minutes. Users can enjoy the convenience of retrieving messages from anywhere in the home, as the answering system can be accessed remotely. The phone also features a bright, easy-to-read LCD display that simplifies navigation through its various functions, including caller ID and call waiting features that keep users informed about incoming calls.

One of the highlights of the VTech IS6100 is its ability to link to mobile devices via Bluetooth, enabling users to make and receive calls through their smartphones. This feature is particularly beneficial for those who prefer to keep their mobile device close at hand while still enjoying the advantages of a traditional phone system. The multiple device capability allows users to connect up to two cell phones, ensuring they never miss important calls.

Additionally, the IS6100 incorporates an intercom feature, which facilitates smooth communication between handsets, making it ideal for families or office environments. The phone can support up to five handsets, allowing for greater flexibility when it comes to communication and collaboration.

The VTech IS6100 also boasts a user-friendly design, with large buttons and an intuitive menu system that appeals to all ages. The phone is designed with energy efficiency in mind, featuring a power-saving mode that contributes to its eco-friendly profile. With its combination of advanced technology, intuitive features, and practical design, the VTech IS6100 stands as a reliable and versatile choice for anyone seeking a modern cordless phone solution.