Appendix

Troubleshooting

•Make sure the cordless headset is placed in the headset charger correctly. The headset light should be on.

•Unplug the headset charger and then plug it back, then charge for up to three hours.

•If the cordless headset is in the headset charger and the headset light is not on, refer to The light on the headset is off while charging below.

•If the battery is completely depleted, it may take up to 15 minutes to charge the headset before it has enough charge to be used for a short time. For optimum daily performance, return the cordless headset to the headset charger when not in use.

•The headset battery may be defective. Contact our customer service for assistance.

The light on the headset is off while charging.

•Make sure the headset charger power adapter is correctly and securely plugged in the electrical outlet.

•Make sure the headset is sitting properly in the headset charger to charge.

•Clean the charging contacts on the headset and headset charger each month with a pencil eraser or a dry non-abrasive fabric.

•Unplug the headset charger power adapter. Wait for 15 seconds before plugging it back in.

My cordless headset is not performing normally.

•Make sure the power cord is correctly and securely plugged into the headset charger. Plug the telephone base into a different working electrical outlet not controlled by a wall switch.

•Move the cordless headset closer to the telephone base. It may be out of range.

•Other electronic products such as HAM radios and other DECT phones can cause interference with your cordless phone. Try installing your phone as far away as possible from these types of electronic devices.

•If your have tried the above suggestions and the headset is still not performing normally, press the RESET inset button with a paper clip or similar object once to restart the headset.

I cannot hear any ring tone from the cordless headset when there is an incoming call.

•The headset does not have an external ringer. The ring tone can only be heard through the headset earpiece.

•Make sure the headset ringer volume is not set to the lowest level (page 19).

•If you have pressed MUTE/FLASH on the cordless headset when it is ringing, it mutes the ring tone of the headset. The ring tone resumes on the next call.

•The headset may be too far from the telephone base. Move it closer to the telephone base.

•You may have too many extension phones on the telephone line to allow all of them to ring simultaneously. Unplug some of them.

•The layout of your home or office may be limiting the operating range. Try moving the telephone base to another location, preferably on a higher location.

•If other telephones in your home are having the same problem, the problem is in the wiring or telephone service. Contact your telephone service provider.

70

Page 73 Page 75
Page 74
Image 74
VTech LS6325-2, IS6100, LS6375-3 Light on the headset is off while charging, My cordless headset is not performing normally
Page 73 Page 75

LS6375-3, LS6325-2, IS6100 specifications

The VTech IS6100 is an innovative cordless phone system that caters to the modern user's needs while providing exceptional functionality and convenience. At the core of its design is a blend of advanced technology and user-friendly features that make it a standout choice for home and office use.

One of the defining features of the VTech IS6100 is its DECT 6.0 technology, which ensures secure, interference-free communication. This technology not only enhances voice clarity but also extends the range of the phone, allowing users to communicate seamlessly throughout their homes or offices without worrying about signal loss. The system comes with a range of up to 1,000 feet outdoors and about 300 feet indoors, making it a practical choice for larger spaces.

The IS6100 is equipped with a digital answering system that has a recording time of up to 14 minutes. Users can enjoy the convenience of retrieving messages from anywhere in the home, as the answering system can be accessed remotely. The phone also features a bright, easy-to-read LCD display that simplifies navigation through its various functions, including caller ID and call waiting features that keep users informed about incoming calls.

One of the highlights of the VTech IS6100 is its ability to link to mobile devices via Bluetooth, enabling users to make and receive calls through their smartphones. This feature is particularly beneficial for those who prefer to keep their mobile device close at hand while still enjoying the advantages of a traditional phone system. The multiple device capability allows users to connect up to two cell phones, ensuring they never miss important calls.

Additionally, the IS6100 incorporates an intercom feature, which facilitates smooth communication between handsets, making it ideal for families or office environments. The phone can support up to five handsets, allowing for greater flexibility when it comes to communication and collaboration.

The VTech IS6100 also boasts a user-friendly design, with large buttons and an intuitive menu system that appeals to all ages. The phone is designed with energy efficiency in mind, featuring a power-saving mode that contributes to its eco-friendly profile. With its combination of advanced technology, intuitive features, and practical design, the VTech IS6100 stands as a reliable and versatile choice for anyone seeking a modern cordless phone solution.
Top Page Image Contents