Answering system operation
2.Press CHANGE to confirm the current status; On or Off is also
displayed on the message window.
3. | Press CHANGE again to change the setting. | ||
4. | Press SETUP to save and advance to the next menu option or press | ||
| PLAY/STOP / |
| to save and exit. |
|
| ||
When the message alert function is turned on, the base beeps every 10 seconds, and PLAY/STOP 
/ 
and the number of messages in the message window flash when there are new messages. If PLAY/ STOP 
/ 
and the number in the message window are on steadily, there are no new messages.
Announcement only mode
In announcement only mode, callers hear an announcement but cannot leave messages. When announcement only is turned on, calls are answered with the
Turn the announcement only mode on or off
•Press SETUP four times, the system announces “Announcement only. Record no messages. To change the setting, press CHANGE.”
•Press CHANGE until you hear the desired option (on or off).
•Press PLAY/STOP 
/ 
to save and exit.
Customize the announcement only message
1.Press SETUP four times, the system announces “Announcement only. Record no messages. To change the setting, press CHANGE.”
www.vtechphones.com
•In some areas, tone dial phone from a remote location phone may not function due to telephone line conditions such as line noise, echo, etc.
41
Basic operation
