Troubleshooting
Problem | Suggestion | |
|
| |
My caller ID isn’t | • Caller ID is a subscription service. You must subscribe to this service for this feature to work | |
working. |
| on your phone. |
| • Your caller must be calling from an area that supports caller ID. | |
| • Both you and your caller’s telephone companies must use caller ID compatible equipment. | |
My answering | • Make sure system is turned ON (the ANS ON/OFF key is illuminated). | |
machine is not | • Make sure the announce only feature is set to OFF. | |
recording messages. |
|
|
I cannot hear recorded | • Using the telephone base volume control, raise the volume to a comfortable listening level. | |
messages. |
|
|
|
|
|
CL is flashing in | • | You need to set the day and time. Refer to the section(s) on setting day and time in this |
the telephone base |
| user’s manual. |
message display | • Make sure announce only feature is set to OFF. | |
window. |
|
|
Common cure for | If the unit does not seem to be responding normally, then try putting the handset in its telephone | |
electronic equipment. | base. If it does not seem to respond, do the following (in the order listed): | |
| 1. | Disconnect the power to the telephone base. |
| 2. | Disconnect the handset battery, and spare battery, if applicable. |
| 3. | Wait a few minutes. |
| 4. | Connect power to the telephone base. |
| 5. | |
| 6. | Wait for the handset to |
|
| one minute for this to take place. |
52 | www.vtechphones.com |
