VTech mi6877, mi6897 user manual Review caller ID, Store caller ID in your directory

Caller ID

Review caller ID

When the handset or base is idle (off), press the to enter the caller id review mode..

-OR-

•With the handset or base idle (off), press MENU..

•Press to scroll to CALL LOG..

•Press SEL. Use and to scroll through the call log entries.. When the beginning or the end of the call log is reached, a double beep will sound.

•If the call log is full, the oldest entry is deleted to make room for the new call.. If the call log is empty the following message is displayed when you try to review CID records:

Store caller ID in your directory

•Follow the steps in Review caller ID (above) to find the record to be stored..

•The phone number in the caller ID log was sent by the phone company.. You may have to dial the number differently.. Press the # key repeatedly to see the different dialing options.. You can add or remove an initial 1 or the area code.. The dialing options are:

•Press SEL to store the displayed number..

•If the caller ID record contains both name and number, the name and number will be stored after pressing SEL..

>CALL LOG RINGER VOLUME

CALL LOG EMPTY

595-9511

1-595-9511

800-595-9511

1-800-595-9511

•Press OFF on the handset (or CLEAR on the base) any time to exit the caller ID log..

•All handsets and the base share a common caller ID log, stored in the base, If a call log entry is deleted, it will disappear from all handsets and the base..

Basic operation

www.vtechphones.com 27