GR SERIES GAS FRYERS
INTRODUCTION
GENERAL | IN CASE SERVICE IS NEEDED |
Vulcan Fryers are produced with quality workmanship and material. Proper installation, usage and maintenance will result in many years of satisfactory performance.
Before installing the fryer, thoroughly read this manual and carefully follow all instructions in the order given.
This manual is applicable to models listed on the cover page. Procedures in this manual will apply to all models unless specified. Pictures and illustrations can be of any model unless the picture or illustration needs to be
Note: For units equipped with KleenScreen™, refer to the KleenScreen™ Interplumbed Filtration System User’s Guide and the supplemental KleenScreen™ instructions supplied with the fryer battery.
In case service is needed, have the following information filled in by the Vulcan Authorized Service Technician who installed this equipment. Also, you may wish to note this information on the front cover so it would be more easily noticed.
Authorized Service Technician
Phone
To locate the closest authorized service agency, go to www.hobartservice.com and click on locations. Enter your zip code for service center information.
You may also call
ORDERING PARTS
Customers may order parts directly from their local authorized service center. If not known, call Vulcan Customer Service at
To speed up your order, provide the model number, serial number, gas type, part needed, item part number (if known), and quantity needed.
FRYER CAPACITIES
| # of |
|
| Width | Shortening, |
Model | Heat Tubes | BTU/hr | Total MJ | inch (cm) | lbs (kg) |
35 | 3 | 90K | 95.00 | 15.5 (39) | |
45 | 4 | 120K | 126.60 | 15.5 (39) | |
65 | 5 | 150K | 158.25 | 21 (53) | |
85 | 5 | 150K | 158.25 | 21 (53) | |
|
|
|
|
|
|
— 5 —
