TURNING OFF THE FRYER (FREE-STANDING MODELS)
1.Turn the thermostat OFF.
2.To keep the pilot lit, turn the gas valve knob to “I” in PILOT.
3.To shut off all gas to the system, including the pilot, turn the gas valve knob to OFF.
LIGHTING THE FRYER
(KLEENSCREEN™ MODELS)
WARNING: BEFORE TURNING ON THE BURNERS, THE FRYER TANK MUST BE FILLED WITH LIQUID SHORTENING. NEVER OPER- ATE FRYER EMPTY OR THE FRYPOT WILL BE DAMAGED AND MAY CAUSE A FIRE, VOIDING YOUR WARRANTY.
GR SERIES GAS FRYERS
4.Push the gas valve handle in and turn to
PILOT.
5.While still depressing the handle, light the pilot with a lit taper. Continue with steps 3 through 5 until the pilot remains lit when the arm is released.
6.Push in and turn gas valve handle to ON.
7.Repeat steps 2 through 6 if gas supply is interrupted.
TURNING ON THE FRYER
(KLEENSCREEN™ MODELS)
•Set the thermostat knob to the desired temperature.
•When the set temperature has been reached, the thermostat shuts off gas flow to the burners.
•The pilot remains lit. The burners will cycle on and off to maintain the set temperature.
AThermostat Knob
BGas Control Valve Handle
1.Open the door.
2.Turn thermostat knob to OFF.
3.Push gas valve handle in and turn arm to OFF. Wait 5 minutes for unburned gas to vent.
TURNING OFF THE FRYER (KLEENSCREEN™ MODELS)
1.Turn the thermostat OFF.
2.To keep the pilot lit, turn the gas valve to
PILOT.
3.To shut off all gas to the system, including the pilot, turn the gas valve to OFF.
EXTENDED SHUTDOWN
1.Thoroughly drain the fryer. Refer to
DRAINING THE FRYER.
2.Clean the fryer according to CLEANING.
3.Turn the thermostat knob to OFF.
4.Push in the gas valve arm or pilot knob and turn to OFF.
5.Turn off the main gas shutoff valve.
— 13 —