GRDF / GRCF SERIES GAS FRYERS
UNPACKING
This fryer was carefully inspected before leaving the factory. Upon acceptance of the shipment, the transportation company assumes full responsibility for safe delivery.
Immediately after unpacking the fryer, check for possible shipping damage. If the fryer is damaged, save the packaging material and contact the carrier within 15 days of delivery.
Check that the following have been included:
Crumb Rack(s)
Basket Hanger(s)
Tank Brush
Adjustable Casters (4) two locking, two
Drain Pipe Extension for freestanding fryers only.
Twin Fry Baskets (2) per fry tank
Cleanout Rod
Crumb Scoop
Fryer Batteries with the KleenScreen PLUS® Filtration System
•Filter Pan
•Suction Tube
•Screen Assembly
•Complimentary Pack of
•Crumb Basket
•6’ high temperature discard hose
Manual, Quick Start Guide(s), and Warranty
Do not use the door or its handle to lift the fryer.
INSTALLATION
Before installing the fryer, verify that the type of gas (natural or propane) agrees with the specifications on the fryer data plate, which is located on the inside of the door panel. Make sure the fryer is configured for the proper elevation.
Record your fryer model, device, and serial numbers for future reference in the space provided below. This information can be found on the fryer data plate.
Fryer Model No: ___________________________
Device: ___________________________________
Serial No: ________________________________
