GRM SERIES GAS FRYERS
THERMAL OVERLOAD PROTECTION BUTTON:
The motor/pump supplied with the filtering system has a thermal overload protection circuit that senses when excess heat occurs due to filtering for long periods of time or under heavy load prior to discarding debris buildup. If the thermal overload protection is tripped, wait 5 minutes and then reset the motor by pushing in the red button. The arrow in Figure 7 shows the location of the reset button; located on the front off the motor / pump facing towards you.
Fig. 7
MAINTENANCE
Hot oil and hot parts can cause burns. Use care when operating, cleaning, and servicing the fryer.
Spilling hot fryer compound can cause severe burns. Do not move fryer without draining all frying compound from the tank.
FLUE VENT INSPECTION
When the fryer is cool, inspect annually. Check the flue and clear any obstructions.
Service in the US and Canada
Contact your local
