Vulcan-Hart 52480 ASSEMBLY - Legs optional, ASSEMBLY - Wall Mounting Brackets optional

ASSEMBLY — Legs (optional)

If using legs, four legs are required on 24, 36, and 48" models; six legs are required on 60 and 72" models. Assemble legs to the bottom of the unit through threaded holes in the four corners of the unit; on 60 and 72" models, the extra two legs mount at the middle of the front and back rails.

ASSEMBLY — Wall Mounting Brackets (optional)

If mounting the Cheese Melter on a wall: Attach the wall mounting bracket(s) to the wall with suitable fasteners (not supplied with the kit); hang the Cheese Melter from its angle iron rail on the wall mounting bracket(s) (Fig. 1).

Angle Iron on Rear of

Cheese Melter Frame

Wall Mounting Brackets

Fig. 1

INSTALLATION CODES AND STANDARDS

In the United States, the Cheese Melter must be installed in accordance with: 1) State and local codes;

2)National Fuel Gas Code, ANSI-Z223.1, latest edition, available from American Gas Association, 1515 Wilson Boulevard, Arlington, VA 22209; and 3) NFPA Standard #96, Vapor Removal from Cooking Equipment, latest edition, available from the National Fire Protection Association, Batterymarch Park, Quincy, MA 02269.

In Canada, the Cheese Melter must be installed in accordance with: 1) Local codes, or in the absence of local codes, with Canadian Standard CAN/CGA-B149.1 NATURAL GAS, latest edition, or CAN/CGA-B149.2 PROPANE GAS, latest edition, available from Canadian Gas Association, 55 Scarsdale Road, Don Mills, Ontario, Canada M3B2R3.

– 4 –