Vulcan-Hart ML-44905Z Canada, Ranges Mounted on Casters, Leveling, Curb Installation

In Canada:

1.Local codes.

2.CAN/CGA-B149.1 Natural Gas Installation Code (latest edition).

3.CAN/CGA-B149.2 Propane Installation Code (latest edition), available from The Canadian Gas Association, 178 Rexdale Blvd., Etobicoke, Ontario, Canada M9W 1R3.

4.Canadian Electrical Code, CSA C22.2 No. 3 (latest edition). Copies may be obtained from The Canadian Standard Association, 178 Rexdale Blvd., Etobicoke, Ontario, Canada M9W 1R3.

RANGES MOUNTED ON CASTERS

When ranges are mounted on casters, you must use a connector (available from Vulcan-Hart) that complies with the Standard for Connectors of Movable Gas Appliances, ANSI-Z21.69 (latest edition), and a quick-disconnect device that complies with the Standard for Quick-Disconnect Devices Complying With Gas Fuel, ANSI-Z21.41 (latest edition) or CAN 1-6.9 (latest edition).

Provide a gas line strain relief to limit movement of the range(s) without depending on the connector and/or any quick-disconnect device or its associated piping to limit movement of the range(s). Attach the strain relief to the rear of the range (Fig. 1).

Should it be necessary to disconnect the strain relief, turn off the gas supply before disconnection. Reconnect the strain relief before turning the gas supply on and returning the range(s) to their installation position.

CONNECT GAS LINE

STRAIN

RELIEF HERE

PL-51219

Fig. 1

LEVELING

Curb Installation

Ranges must overhang curb 3" (8 cm) in front. To level each range, remove oven bottom. Adjust four corner leveling bolts as required to level the appliance on all sides.

— 10 —