Vulcan-Hart ML-44905Z operation manual Standard Oven With Standing Pilot Fig

Standard Oven With Standing Pilot (Fig. 2)

1.Turn Thermostat and Shut-off Valve to the OFF position.

2.Wait 5 minutes.

3.Remove lower panel.

4.Depress Red Button on safety valve and light pilot through observation hole.

5.Hold down Red Button for at least 30 seconds.

6.When button is released, pilot should remain lit. Pilot flame may be adjusted with screw on pilot adjustment valve on pilot supply tubing located behind the control panel. There should be only a slight amount of yellow in the properly adjusted pilot flame.

7.Replace lower panel.

8.Turn Shut-off Valve to the ON position and turn the Thermostat to the desired temperature.

9.If pilot flame becomes extinguished, repeat the above procedure.

10.For a complete shutdown, turn the Thermostat, Shut-off Valve, and gas shut-off valve to the OFF position.

Standard Oven with Electric Ignition (Fig. 3)

1.Turn Thermostat and Shut-off Valve to OFF position. Wait 5 minutes.

2.Turn Shut-off Valve to ON position.

3.Turn Thermostat to desired setting.

4.Oven burner lights automatically.

5.For a complete shutdown, turn the Thermostat, Shut-off Valve, and gas shut-off valve to the OFF position.

SHUT-OFF

VALVE

THERMOSTAT

RED BUTTON (SAFETY)

PL-53512

Fig. 2

SHUT-OFF

VALVE

THERMOSTAT

PL-53513

Fig. 3

— 14 —