Vulcan-Hart VMX, VEX, VRC, VS operation manual Operating Hints, Cooking Tips, VR Oven, Range Top

To operate the convection oven, arrange oven racks as required, turn the power switch to ON and set the thermostat dial to the desired temperature setting. Allow the oven indicator light to cycle on and off at least twice to ensure that the oven has reached the preset cooking temperature. Load product as quickly as possible. Place pans on center of racks.

After cooking is completed, open oven door and unload product. After oven cools, wipe up any spills as quickly as possible to prevent them from becoming stubborn stains.

OPERATING HINTS

Preheat the oven and surface units to cooking temperature before cooking the product. Become familiar with the function of the controls and the area of their operation.

Avoid excessive door opening. Also avoid direct air current on the oven.

Use flat-bottomed, straight-sided pots and pans.

Use covers for stock pot work. Water will boil much sooner and much less heat is required for cooking in a covered container.

Turn high speed elements off a few minutes before cooking is completed to use the heat stored in the element.

After each cooking load, scrape excess food and fat particles off the griddle surface, using a flexible spatula or wire brush.

COOKING TIPS

VR Oven

While it is recommended that the 3-heat switches be set to the HI position in order to preheat the oven to the desired temperature, it is necessary for some baking products to turn the 3-heat switch controlling the top elements to the MED or LO position in order to reduce the amount of radiant heat applied to the product so that the top portion of the product will not be burned.

Uneven cooking may be prevented by different settings for the top and bottom oven 3-heat switches. The amount of heat applied to a product inside the oven is affected not only by the setting of the thermostat and 3-heat switches, but also by its position inside the oven and the frequency of opening and closing the oven door.

Meat roasting is best performed in a balanced oven; 3-heat switch positions of HI and HI are suggested, with the thermostat setting at the low temperature recommended by the American Meat Institute and the Department of Agriculture. Top heat results in a well colored or carmelized finish to meats. When roasting fowl and a heavily browned appearance is not desired, set the top 3-heat switch at MED or LO. It is recommended that a meat thermometer be used for all meat roasting operations.

Range Top

Typical cooking operations require quick changes from high to low heats. With versatile Vulcan range tops, you can maintain different sections at different temperatures and just shift utensils from one section to another when you wish to change the speed of cooking.

14