VXI Six-Slot VXIBus Chassis DC Supply Voltage, Peak Current IMP, Dynamic Current IMD, DC Load

www.vxitech.com

POWER SPECIFICATIONS

USEABLE POWER

450 W at 40°C

DC Supply Voltage

Voltage	Peak Current (IMP)	Dynamic Current (IMD)
+5 V	35 A	5 A
-5.2 V	25 A	4 A
-2 V	7 A	2 A
+12 V	4 A	2 A
-12 V	4 A	1.5 A
+24 V	4 A	3 A
-24 V	4 A	3 A

Output Voltage

		Voltage	Allowed Variation	Ripple/Noise	Induced Ripple
				DC Load	Noise
		+5 V	+0.25 V / -0.125 V	50 mV	50 mV
		-5.2 V	-0.26 V / +0.125 V	50 mV	50 mV
		-2 V	-0.10 V / +0.72 V	50 mV	50 mV
		+12 V	+0.60 V / +0.36 V	50 mV	50 mV
		-12 V	-0.60 V / +0.36 V	50 mV	50 mV
		+24 V	+1.20 V / -0.72 V	150 mV	150 mV
		-24 V	-1.20 V / +0.74 V	150 mV	150 mV
POWER INPUT
Input Voltage	115 VAC, nominal 90 – 132 VAC
AC
	230 VAC, Nominal 180 – 264 VAC}Auto Selected
Frequency	47 Hz – 63 Hz
Fuse	10 A slow blow
115 V Operation
220 V Operation	5 A slow blow
+5VSTBY

6 A max, user supplied

Standard banana jack on rear panel, voltage and ground

POWER SUPPLIES (TBD)

UL, CSA, TUV approved

Shout circuit, over-voltage, reverse voltage and thermal shutdown protection

CT-100B Installation 15