9

GETTING STARTED WITH yOUR WATER FLOSSER

Plug the cord into an electrical outlet. If the outlet is controlled by a wall switch, be sure it is turned on.

Preparing the Reservoir

Lift the reservoir lid, remove the reservoir, and fill with lukewarm water. Replace the reservoir over the base and press down firmly and close the lid.

Remove

Fill

Inserting and Removing Tips

Insert tip into the center of the Water Flosser handle, pressing down firmly until tip clicks into place. The colored ring will be flush with the top of the handle if the tip is correctly locked into place. Gently pull on tip to confirm it is seated properly and locked in place.

To remove tip from the handle push the tip eject button on the handle. The control knob will rise, releasing the tip. Remove the tip.

Caution: Do not press tip eject button while unit is running.

Tip Insertion

Insert

NO

Gap

Tip Removal

Replace

Eject

Tip

Eject

Button

ENGLISH

Page 9
Image 9
Waterpik Technologies wp-900 Getting Started with yOUR Water Flosser, Preparing the Reservoir, Inserting and Removing Tips