Out Ceiling/Output Meter

L3-LL User Manual

Out Ceiling/Output Meter

-Range -30dB to 0dB

-Default 0dB

The Out Ceiling fader sets maximum output level, scaling the output signal to reach the out ceiling value but not exceed it.

The Out Ceiling fader is located on the Output Meter. Below the Output Meter are Waves standard peak indicators. Click the peak indicator field to reset.

Threshold/Out Ceiling Link

The Threshold/Out Ceiling Link button lets you adjust the Threshold and the Out Ceiling faders simultaneously, allowing threshold setting changes while monitoring the limiter effect without its makeup gain action.

Attenuation Meter

-Range -30dB to 0dB

The Attenuation Meter displays the overall (wideband) attenuation.

Ultramaximizer Profiles

-Range

Basic Profile

Extreme Analog

Semi Separated

WideBand ARC

WideBand Manual

Cosy & Warm

Loud & Proud

Lean & Mean

Low Level Loudness

- Default

Basic Profile

The Profiles drop down menu contains factory settings for the L3-LL Ultramaximizer internal frequency bands controls. Each Profile contains per band Priority, Release, and Separation settings, otherwise only available in the L3-Multimaximizer.

11

Page 11
Image 11
Waves L3-LL Out Ceiling/Output Meter, Threshold/Out Ceiling Link, Attenuation Meter, Ultramaximizer Profiles, Default 0dB