Gain
-Range
-Default 0dB
Gain controls the overall gain of each frequency band. To boost the gain of a given range without over- limiting it, raise both Priority and Gain.
Gain/Priority Link
The 
button allows simultaneous control of Gain and Priority, retaining a constant offset between them.
Priority
-Range
-Default 0dB
Priority adjusts the relative limiting, or relative attenuation distribution, across the bands. Raising Priority applies less attenuation to the respective bands (in relation to other bands) while maintaining the same overall limiting; lowering Priority results in more attenuation applied to the respective bands. It’s important to remember that Priority settings are RELATIVE between bands. This means that if all bands are set to the same
Priority Indicators
-Range
-Default 0dB
The 
displays the applied priority for the frequency band.
Per Band Release
-Range 0.1 to 2500.
The per band Release sets the reference Release time for each band. This reference release time can be further adjusted by the Master Release Behavior type.
Master Release Link
The 
button allows relative release adjustment for all bands.
16
