Waves L3-LL Value Window Buttons, Faders, Band Markers, Click-verticaldrag changes gain

L3-LL User Manual

Value Window Buttons

Value windows display the value of a control and allow click-and-dragadjustment, or direct control via the keyboard.

•Using the mouse, click-and-drag on the value window to adjust. Some value windows support left/right, some up/down (as you hover over a button, arrows will appear to let you know which direction of movement that button supports).

•Using the arrow keys, click once with mouse to select the button, and then use up/down – left/right (depending on the direction supported by that button) to move in the smallest incremental steps across the button’s range (holding down the arrow keys will move faster through the range).

•Using key entry, double click on the button to open the value window, and directly enter the value from your keyboard. If you enter an out of range number, the button stays selected but remains at the current setting (system beeps? If system sounds are on?)

Some processors have link buttons between a pair of value windows, allowing click-and-drag adjustment while retaining the offset between the controls.

Faders

Click on the fader itself or anywhere within the fader track. The numerical value of the slider settings is displayed in a window above the slider path. When pairs of faders are provided for stereo controls (such as in the Q10) click-and-drag between the faders will adjust both faders together (maintaining any offset between them if there is some)

Band Markers

Band markers appear on all Waves graphic displays, and have many functions:

•Click-vertical drag changes gain.

•Click-horizontal drag changes frequency.

•Click- diagonal drag will adjust gain and frequency together.

•Control-click(PC)/Command-click(Mac) and drag constrains movement to the X or Y axis – vertical drag will lock frequency but allow gain change, and horizontal drag will lock gain but allow frequency change.

•Alt-click (PC)/Option-click (Mac) and horizontal drag allows Q adjustment.

•Shift-clickto select multiple band markers for simultaneous control, and shift-click again on any marker you wish to de-select.

•Double click (PC) /Command-click(Mac) on any band marker to toggle in or out.

•Drag on any de-activated band marker to re-activate it.

•Option/Command-click(Mac only, not supported on PC) to change filter type.

22