Contact Obstruction Test

21	Contact Obstruction Test
	Contact Obstruction Test
Tools Needed:	After installing the opener, the door must
	reverse when it contacts a 1 1/2” inch high
2 x 4 Board	object (or a 2 x 4 board laid flat) on the
	garage floor.
	Using the wall station, activate the door to
	the fully open position. Place a 2 x 4 flat
	on the garage floor, under the door path.
	Activate the door to the closed position with
	the wall station. Upon contacting the 2 x 4
	board, the door should reverse.
	If door stops on the 2 x 4 board, adjust	2 x 4 Laid Flat
	If door stops on the 2 x 4 board, adjust	On The Floor
	the close travel knob 1/8-1/4 turn “more”
	until door reverses upon contact with 2 x 4
	board.
	When the door reverses, remove the
	2 x 4 board and run the full cycle of open
	and close of the door. Door should not	WARNING
	reverse when it comes to the fully closed	WARNING
	reverse when it comes to the fully closed
	position on the floor.	IF OPENER DOES NOT RESPOND PROPERLY TO THESE TESTS (STEPS
		IF OPENER DOES NOT RESPOND PROPERLY TO THESE TESTS (STEPS
	NOTE: If opener fails to pass this test,	21 AND 22), HAVE A QUALIFIED SERVICE PERSON MAKE NECESSARY
	NOTE: If opener fails to pass this test,	ADJUSTMENTS/REPAIRS, OR SEVERE OR FATAL INJURY COULD
	repeat Step 19. Also see Adjustment #2,	ADJUSTMENTS/REPAIRS, OR SEVERE OR FATAL INJURY COULD
	repeat Step 19. Also see Adjustment #2,	RESULT FROM OPERATING THE DOOR/OPENER.
	page 32 (Contact Obstruction Test).	RESULT FROM OPERATING THE DOOR/OPENER.
	page 32 (Contact Obstruction Test).

22		Safety Sensor Obstruction Test
Tools Needed:
			WARNING

2” x 6” x 12”	WHEN PERFORMING THIS PART OF THE
Solid Test Object	TEST, DO NOT PLACE YOURSELF UNDER
	DESCENDING DOOR, OR SEVERE OR
	FATAL INJURY MAY RESULT.
	Starting with the door fully open, place a 6”
	high object on the floor, in line with sensors,
	12” from the left side of the door.
	Activation of the opener with the wall station
	Up/Down button should cause the door to
	move no more than one foot, stop and then
	reverse to fully open position.
	Repeat this test with the 6” high object
	placed at the center of the door and then
	12” from the right side of the door.
	The 6” high object, when placed on the floor
	in line with sensors, while door is closing,
	should also cause the door to reverse.

	Sensor
6”	12”
6”
12”
Sensor

WARNING

IF OPENER DOES NOT RESPOND PROPERLY TO THESE TESTS (STEPS 21 AND 22), HAVE A QUALIFIED SERVICE PERSON MAKE NECESSARY ADJUSTMENTS/REPAIRS, OR SEVERE OR FATAL INJURY COULD RESULT FROM OPERATING THE DOOR/OPENER.

Please Do Not Return This Product To The Store. Call Us Directly! Our Trained Technicians Will Answer Your Questions and/or Ship Any Parts You May Need 17 You can reach us Toll Free at 1-888-827-3667 for Consumer Assistance or online at www.wayne-dalton.com

3324B-Z specifications

Wayne-Dalton is renowned for its commitment to innovative door solutions, and the Wayne-Dalton 3324B-Z is a prime example of their cutting-edge offerings in the realm of garage doors. This model is designed for residential settings, combining aesthetics with functionality.

One of the standout features of the 3324B-Z is its construction. The door is made from high-quality steel, ensuring exceptional durability and resistance to external elements. This steel is reinforced to provide strength and support, which is critical for maintaining the stability of the door over time. Moreover, the door is insulated with polyurethane, offering enhanced thermal efficiency. This insulation not only helps to regulate temperature within the garage but also contributes to energy savings by reducing heating and cooling costs.

Aesthetic appeal is another hallmark of the Wayne-Dalton 3324B-Z. Featuring a contemporary design, it is available in multiple color options and finishes, allowing homeowners to customize the look of their home while enhancing curb appeal. The door's design includes raised panel sections that add depth and texture, making it visually appealing without compromising on functionality.

In terms of technology, the Wayne-Dalton 3324B-Z integrates various advancements to enhance user experience and safety. It is equipped with a reliable spring system that promotes smooth operation and extends the lifespan of the door. The door can also be paired with Wayne-Dalton's innovative Quantum garage door opener, which features advanced security and remote access capabilities, allowing homeowners to operate their doors from anywhere via a smartphone app.

Safety is a paramount consideration in the design of the 3324B-Z. The door incorporates features such as pinch-resistant design, reinforced hinges, and safety sensors to protect users and pets from potential accidents during operation.

Installation and maintenance are also simplified with the Wayne-Dalton 3324B-Z. The door comes with detailed instructions for easy setup, and its durable materials require minimal upkeep, ensuring a long-lasting performance with minimal hassle.

In conclusion, the Wayne-Dalton 3324B-Z is a sophisticated choice for any homeowner seeking a balance of style, durability, and advanced technology. Its robust construction, attractive design, and safety features make it an ideal addition to modern homes. Whether upgrading an existing garage door or installing a new one, the 3324B-Z is a solution that stands out in functionality and aesthetics.

Wayne-Dalton 3324B-Z installation instructions Contact Obstruction Test, Fatal Injury MAY Result

Models: 3324B-Z

position on the floor.

Safety Sensor Obstruction Test

2” x 6” x 12”

FATAL INJURY MAY RESULT.

12” from the left side of the door.

12” from the right side of the door.

should also cause the door to reverse.

3324B-Z specifications