Wayne-Dalton 3324B-Z installation instructions Connecting Door Arm, DIM Type of ARM

Setting Trolley Close Position/

Connecting Door Arm

(Continued)

LOW HEADROOM:

Using the LOW HEADROOM TROLLEY POSITIONING CHARTS, refer to DIM “X” to set the distance from header to trolley, as shown in FIG. 1.6.

NOTE: Depending on your setup, you may or may not have to cut straight arm to accomplish trolley settings.

If adjustment of the trolley position is required, use the close travel adjustment screw located on the bottom of the opener, as shown in FIG 1.5. A 1/4 turn equals approximately 1” of trolley travel; turn clockwise to decrease distance (forward) and counter-clockwise to increase distance (forward).

LOW HEADROOM TROLLEY POSITIONING CHART FOR (MODELS 9100, 9400, 9600, 5120 & 5140)

		TYPE OF ARM	REFERENCE
DIM “X”			ILLUSTRATIONS
		BEING USED
			TO THE RIGHT
14 1/2”		CURVED /	FIG. 1.7
		STRAIGHT
	OPTIONAL HOOKUP
10” - 14”		STRAIGHT	FIG. 1.7a
LOW HEADROOM TROLLEY POSITIONING CHART
	FOR (MODEL 9700)
DIM “X”		TYPE OF ARM	REFERENCE
		BEING USED	ILLUSTRATIONS
14 3/4”-		CURVED /	FIG. 1.7
17 11/16”		STRAIGHT
	OPTIONAL HOOKUP
10” - 14”		STRAIGHT	FIG. 1.7a

NOTE: Proceed with “Connecting Door Arm To Door” Step 18, on page 14.

TRAVEL ADJUSTMENT
OPEN	CLOSE	Bottom Of Opener
MORE	LESS
	MORE
	FIG. 1.5
		“X”
		Low Headroom Track
	Top
	Section
		FIG. 1.6
Curved Arm
		Straight Arm
	Cut Straight Arm To
	Accomplish Trolley
	Setting
	FIG. 1.7	FIG. 1.7a

24Please Do Not Return This Product To The Store. Call Us Directly! Our Trained Technicians Will Answer Your Questions and/or Ship Any Parts You May Need

You can reach us Toll Free at 1-888-827-3667 for Consumer Assistance or online at www.wayne-dalton.com