Your Weber Gas Grill Manifold assembly consisting of | Install manifold bracket |
| |
gas manifold, valves and gas burners has been factory | You will need: manifold bracket. |
| |
assembled, pressure- and flame- tested. As a safety | Hook the bracket(2) onto the manifold at the center | ||
precaution, we recommend you check the burner | burner valve. Place your hand underneath the bracket. | ||
alignment: | Lift the manifold, bracket and cooking box slightly, then | ||
1) Are the ends of the burners under the washers at | hook the tab of the bracket onto the frame brace(1). | ||
the left rear and left front of the cooking box? The | (1) | (2) | |
screws are only guides. Do not tighten. | |||
| |||
2)Do the valves fit into the ends of the burners?
3)Are the wing nuts under the burner assembly hand
tight? Do not tighten with pliers.
If you answered YES to 1, 2 and 3, the burners are
correctly aligned. If you answered NO, the burners are
misaligned. Contact the Customer Service Representative in your region using the contact information sheet provided with your manual. Do not use grill.
(2)
(1)
(3)
