Install control panel and burner control knobs | Install Flavorizer® Bars and Cooking Grates |
You will need: control panel, two Phillips screws/ | You will need: five Flavorizer Bars and two cooking |
washers, a Phillips screwdriver, and burner control | grates. |
knobs. | Place the Flavorizer Bars side by side in the cooking |
1) Set the control panel in place over both frame | box. |
braces. Hold the Crossover Ignition button up |
|
while setting the control panel in place. |
|
2)While looking under the right trim piece push the control panel down and line up the holes in the control panel with the white plastic plugs in the frame brace. Insert screws and tighten with a
phillips screw driver until snug. Do not over
tighten.
3) Push each of the burner control knobs onto their valve.
(1)
Set the cooking grates onto the ledges in the cooking box with the rounded sides up.
(2)
(3)
