![](/images/new-backgrounds/1229574/22957443x1.webp)
To raise | Install the left end trim piece and |
up and slide it to the left, then lower table until you feel | surface |
it lock in the up position. | You will need: End trim piece, |
| |
To lower | nylon washers and a wrench |
disengages and slide it to the right. Then lower it all | 1.) Start the left end trim piece into the frame as |
the way down so that the locking pin on the right side | shown, do not push the trim piece in all of the |
of the table fits into the locking bracket on the leg, | way and do not add bolts yet. |
which will secure the table in the down position. |
|
Do not use the |
|
board. |
|
2.) Slide the
3.) Insert one end of the