Check that all burner valves are off | Connect flexible hose to manifold |
You will need: burner control knobs. | You will need: the 12 foot natural supply hose and a |
Valves are shipped in the OFF position, but you should | 3/4 inch wrench. |
check to be sure that they are turned OFF. Put the | Thread fitting end of hose onto manifold. Tighten with |
knob on each valve. Check by pushing down and | wrench. |
turning clockwise. If they do not turn, they are off. |
|
Proceed to the next step. If they do turn continue |
|
turning them clockwise until they stop., then they are |
|
off. Proceed to the next step. |
|
