THIS GAS APPLIANCE IS DESIGNED FOR OUTDOOR USE ONLY
m DANGER If you smell gas 1. Shut off gas to the appliance
2. Extinguish any open flames 3. Open lid
m WARNING
m WARNINGS
m DANGER
to property
250 South Hicks Road
Warranty
Customer Service Center
WEBER-STEPHEN PRODUCTS CO
Contents
Storage
Gas Supply Testing
For Installation in Canada
General Instructions
Genesis Platinum-C NG
Page
Page
Remove Grill from Lower Packaging
Remove Packaging from Grill
packaging requires at least two people
A-10
You will need the slide out bottom tray1, catch pan
Assembly Instructions
holder2, catch pan and one disposable drip pan
You will need Warm-Up Basket
Install Flavorizer Bars and Cooking Grates
Installing the Warm-Up Basket
You will need five Flavorizer Bars and two cooking
Check that all burner valves are off
Installing Work Surfaces, Side Burner Gas Connection Guidelines
Install Left Work Surface
Install Side Burner Assembly
tions. In absence of Local Codes, you must con
codes regulating outdoor gas barbecue installa
OMMEND THAT THIS INSTALLATION BE DONE BY
Note - Contact your local municipality for building
leaks. Be sure there are no sparks or open
Check for gas leaks
m DANGER
Do not use an open flame to check for gas
Note - All factory-made connections have been
been flame-tested. As a safety precaution however
you should recheck all fittings for leaks before using
Check for gas leaks
Reinstall control panel after checking for gas leaks
barbecue’s burners, or not waiting 5 min
Lighting
To Extinguish
Failure to open the lid while igniting the
m DANGER
Manual Lighting
Failure to open lid while igniting the
To Extinguish
can cause serious bodily injury or death
Lighting the Side Burner
gas to clear if the side burner does not light
may result in an explosive flame-up which
Note The temperature inside your cooking box for the
Cleaning
Cooking
Storage
mend using the FireSpice Chips because they ignite
Using the Smoker Box
IMPORTANT NOTE Ambient temperature, type and
size of wood, moisture content and wind condition will
leaks. Sparks or flames will result in a fire
Annual Maintenance
Inspection and Cleaning of the Weber
flames in the area while you check for
Main Burner Flame Pattern
General Maintenance
Main Burner Cleaning Procedure
symptoms may result in a fire, which can
m CAUTION The burner openings1 must be
Replacing Main Burners
positioned properly over the valve orifices2
m WARNING After reinstalling the gas lines, they
Crossover Ignition System Operations
fit tightly, contact the Customer Service Represen
tative in your region using the contact information
Cure
Troubleshooting
Problem
Check
Cure
Side Burner Troubleshooting
Problem
Check
should be in the OFF position
Side Burner Maintenance
igniter lock nut with an adjustable wrench or pliers
mWARNING All gas controls and supply valves
mCAUTION Do not enlarge the slots in the burner
To Clean the Burner Head
To Reassemble the Burner Head
ring. Only clean with a cloth and soap and water