m WARNING
m DANGER If you smell gas 1. Shut off gas to the appliance
2. Extinguish any open flames 3. Open lid
THIS GAS APPLIANCE IS DESIGNED FOR OUTDOOR USE ONLY
m DANGER
m WARNINGS
to property
WEBER-STEPHEN PRODUCTS CO
Warranty
Customer Service Center
250 South Hicks Road
Contents
General Instructions
Gas Supply Testing
For Installation in Canada
Storage
Genesis Platinum-C NG
Page
Page
Remove Packaging from Grill
Remove Grill from Lower Packaging
packaging requires at least two people
A-10
Assembly Instructions
You will need the slide out bottom tray1, catch pan
holder2, catch pan and one disposable drip pan
You will need five Flavorizer Bars and two cooking
Install Flavorizer Bars and Cooking Grates
Installing the Warm-Up Basket
You will need Warm-Up Basket
Install Side Burner Assembly
Installing Work Surfaces, Side Burner Gas Connection Guidelines
Install Left Work Surface
Check that all burner valves are off
Note - Contact your local municipality for building
codes regulating outdoor gas barbecue installa
OMMEND THAT THIS INSTALLATION BE DONE BY
tions. In absence of Local Codes, you must con
Do not use an open flame to check for gas
Check for gas leaks
m DANGER
leaks. Be sure there are no sparks or open
Check for gas leaks
been flame-tested. As a safety precaution however
you should recheck all fittings for leaks before using
Note - All factory-made connections have been
Reinstall control panel after checking for gas leaks
Failure to open the lid while igniting the
Lighting
To Extinguish
barbecue’s burners, or not waiting 5 min
To Extinguish
Manual Lighting
Failure to open lid while igniting the
m DANGER
may result in an explosive flame-up which
Lighting the Side Burner
gas to clear if the side burner does not light
can cause serious bodily injury or death
Storage
Cleaning
Cooking
Note The temperature inside your cooking box for the
size of wood, moisture content and wind condition will
Using the Smoker Box
IMPORTANT NOTE Ambient temperature, type and
mend using the FireSpice Chips because they ignite
flames in the area while you check for
Annual Maintenance
Inspection and Cleaning of the Weber
leaks. Sparks or flames will result in a fire
symptoms may result in a fire, which can
General Maintenance
Main Burner Cleaning Procedure
Main Burner Flame Pattern
Replacing Main Burners
m CAUTION The burner openings1 must be
positioned properly over the valve orifices2
tative in your region using the contact information
Crossover Ignition System Operations
fit tightly, contact the Customer Service Represen
m WARNING After reinstalling the gas lines, they
Check
Troubleshooting
Problem
Cure
Check
Side Burner Troubleshooting
Problem
Cure
mWARNING All gas controls and supply valves
Side Burner Maintenance
igniter lock nut with an adjustable wrench or pliers
should be in the OFF position
ring. Only clean with a cloth and soap and water
To Clean the Burner Head
To Reassemble the Burner Head
mCAUTION Do not enlarge the slots in the burner