16.Attach the Leg Bumper (59) to the Right Seat Frame (3) with an M4 x 16mm
(89)and an M4 Washer (96).
Grease an M10 x 75mm Bolt (60). Attach the Leg Lever (4) to the Right Seat Frame (3) with the Bolt and an M10 Nylon Locknut (90). Make sure the "U'=rod is on the indicated side of the Leg Lever. Do not overtighten the Locknut; the Leg Lever must be able to pivot easily.
17.Grease an M10 x 108mm Bolt (72). Orient the Press Frame (29) as shown. Attach the Press Frame to the Left Base (25) with the Bolt and an M10 Nylon Locknut (90). Do not overtighten the Locknut; the Press Frame must be able to pivot easily.
16
17
_29
i Grease
i i
18. Attach a Press Handle (32) to a Press Arm (30) | 18 | |
with an M10 x 65mm Bolt (77), two M10 Washers | ||
| ||
(99), two M10 x 12mm Spacers (101), and an |
| |
M10 Nylon Locknut (90). |
|
Attach a Press Arm Cap (34) to the Press Arm
(30)with an M10 x 45mm Button Bolt (81) and an
M10 Large Washer (100).
Repeat this step with the other Press Arm
(30).
81
100_,f
34_
90 99
30
101
101
99
77
11
