9. | Slide two Weight Bumpers (45) onto the Weight | 44 |
| Guides (44). Slide the eight Weights (55), with the | |
|
| |
| pin holes on the indicated side, onto the Weight |
|
| Guides. |
|
| Press the Weight Tube Bumper (46) into the |
|
| Weight Tube (47). Insert the Weight Tube into the |
|
| stack of Weights (55). Make sure the pin on the |
|
| Weight Tube sits in the groove in the top |
|
| Weight. |
|
| Grease the indicated holes in the Top Weight (56) |
|
| with an included grease pack. Slide the Top |
|
| Weight onto the Weight Guides (44). |
|
Holes
10. Attach the Right Top Frame (5) to the Right | 10 | ||
Upright (2) with two M8 x 78mm Bolts (82), two | |||
82 | |||
M8 Washers (98), and two M8 Nylon Locknuts | |||
| |||
(91). Do not tighten the Locknuts yet. Make |
| ||
sure | the Weight Guides (44) are behind the | 98. | |
Right | Top Frame. | 5 | |
| |||
91
44-
11. Attach a Weight Guide (44) to the Right | Top | 11 |
|
Frame (5) with an M8 x 78mm Bolt (82), | two M8 |
| 82 |
Washers (98), and an M8 Nylon Locknut (91). Do |
| ||
|
| ||
not tighten the Locknut yet. |
| 5 | i_98 |
Repeat this step with the other Weight Guide (44).
9
