27.Wrap the Press Cable (109) around a
Cable Trap and Finger Guards are oriented as shown.
27
09
-111
/66
28.Wrap the Press Cable (109) around a 90mm Pulley (63). Attach the Pulley, two Half Finger Guards (66), a Cable Trap (68), and an MIO Washer (99) to the Press Frame (29) with the MIO x 135mm Bolt (70) used in step 26 and an MIO Nylon Locknut (90). Make sure the Cable
Trap and Finger Guards are oriented as shown.
29. Wrap the Press Cable | (109) under a 90mm |
Pulley (63). Attach the | Pulley, two MIO Washers |
(99), and two Half Finger Guards (66) inside the | |
bracket on the Left Base (25) with an MIO x | |
90/
28
109
7O
66 90
63 2
66
50mm Bolt (64) and an MIO Nylon Locknut (90). |
Make sure the Finger Guards are oriented as |
shown. |
30.Wrap the Press Cable (109) over a 90mm Pulley (63). Attach the Pulley and a Cable Trap (68) to the Right Top Frame (5) with an MIO x 45mm Bolt (80) and an MIO Nylon Locknut (90). Make sure the Cable Trap is oriented to hold the Cable in the groove of the Pulley.
99
64
109
30
80 68
63
9O
09
14
