50. Wrap the Ab Cable (107) under a 90mm Pulley | 50 |
(63). Attach the Pulley, a Cable Trap (68), and two Half Finger Guards (66) to the Right Base (1) with an MIO x 50mm Bolt (64) and an MIO Nylon Locknut (90). Make sure the Cable Trap and Finger Guards are oriented as shown.
51.Wrap the Ab Cable (107) over a 90mm Pulley
(63). Attach the Pulley, a Cable Trap (68), and two Half Finger Guards (66) at the second hole from the bottom of the two Pulley Plates (51) with an MIO x 50mm Bolt (64) and an MIO Nylon Locknut (90). Make sure the Cable Trap and Finger Guards are oriented as shown.
52. Wrap the Ab Cable (107) under a 90mm Pulley | 52 | |
(63). Attach the Pulley, a Cable Trap (68), and | ||
| ||
two Half Finger Covers (66) to the Right Base (1) |
| |
with an MIO x 50mm Bolt (64) and an MIO Nylon |
| |
Locknut (90). Make sure the Cable Trap and |
| |
Finger Guards are oriented as shown. |
|
53. Wrap the Ab Cable (107) over a 90mm Pulley | 53 |
(63). Attach the Pulley, a Cable Trap (68), and two Half Finger Guards (66) to the lower hole in the indicated
Make sure the Cable Trap and Finger Guards are oriented as shown.
54. Wrap the Ab Cable (107) under a 90mm Pulley | 54 |
(63). Attach the Pulley, a Cable Trap (68) and two Half Finger Guards (66) to the Right Base (1) with an MIO x 50mm Bolt (64) and an MIO Nylon Locknut (90). Make sure the Cable Trap and Finger Guards are oriented as shown.
90 66 107
50,
66
64,
9O
66-
1
163_64
68
19
