ARM ASSEMBLY
20.Press a 1 3/4” Square Inner Cap (48) into the lower end of the Left Arm (6). Wet the lower end of the Left Arm with soapy water. Slide a 10” Pad (22) onto the Left Arm.
Repeat this step with the Right Arm (5).
21.Press a 1 3/4” Square Inner Cap (48) into the top of the Leg Lever Frame (30).
Slide the Leg Lever Frame (30) into the Rear Seat Frame (16). Align one of the holes in the Leg Lever Frame with the upper hole in the Rear Seat Frame. Insert the Large Lock Pin (96) into the Rear Seat Frame.
Tighten the 1/4” x 5/8” Screw (99) into the lower hole in the Rear Seat Frame (16).
22.Press a 1 3/4” Square Inner Cap (48) into each end of the Leg Lever (15). Attach the Small Bumper (95) to the Leg Lever with a 1” Tap Screw (72).
Lubricate a 3/8” x 2 1/2” Bolt (65). Attach the Leg Lever (15) to the Leg Lever Frame (30) with the Bolt and a 3/8” Nylon Jam Nut (43).
20 |
|
| 6 |
5 |
|
| 48 |
22 |
|
| 22 |
21 |
|
48 | |
30 |
|
16 | 96 |
| |
99 |
|
22 |
|
43 | 30 |
48 |
|
| 65 |
72 |
|
15 |
|
95 |
|
48 |
|
12
