Weider 831.159290 Attaching the AB Strap to the AB Pulley Station, Adjusting the LEG Lever

ATTACHING THE AB STRAP TO THE AB PULLEY STATION

Attach the Ab Strap (35) to the Rear Cable (87) at the ab pulley station with a Cable Clip (33).

ADJUSTING THE LEG LEVER

To change the height of the Leg Lever (15), remove the Large Lock Pin (96) from the Rear Seat Frame

(16)and Leg Lever Frame. Position the Leg Lever Frame at the desired height, align the holes in the Rear Seat Frame and Leg Lever Frame and re-insert the Lock Pin. Be sure that the hook on the Lock Pin is clipped in place on the Rear Seat Frame. Also, when the Leg Lever Frame is at the highest position, you can use the upper foam pads to hold your legs in place while you use the high pulley station.

WARNING: The lock pin must always be inserted through both the rear seat frame and leg lever frame and clipped in place on the rear seat frame.

ADJUSTING THE LEG PRESS PLATE

Remove the Small Lock Pin (73) from the Adjustment Tube (10).

Align the holes in the Leg Press Arm (9) with the desired set of holes in the Adjustment Tube (10). Re- insert the Lock Pin (73) through the holes in the Leg Press Arm and the holes in the Adjustment Tube. Be sure that the hook on the Lock Pin is clipped in place on the Adjustment Tube.

	87
	33
35
	30
15	96
16
	Hook
73	10
	9

27