Weider 831.159290 user manual Cable Assembly

CABLE ASSEMBLY

38.Attach the Rear Cable (87) to the Leg Lever (15) with a 5/16” x 3” Bolt (92), a 5/16” Washer (20), a 5/8” x 9/16” Bushing (61) and a 5/16” Nylon Locknut (40).

39.Find the Low Cable (89)—this is the short- est of the two remaining Cables. Feed the Low Cable under the 3 1/2” Pro Pulley (97) and the row tube on the Pulley Base (79).

The ball on the Cable must be on the side shown. Tighten the 3/8” x 2” Bolt (50) and 3/8” Nylon Locknut (not shown).

40.Wrap the Low Cable (89) around a “V” Pulley (81). Slide the “V” Pulley and a Large Cable Trap (83) onto the 3/8” x 4” Carriage Bolt (57) in the Weight Base (14). Tighten a 3/8” Nylon Locknut (42) onto the Carriage Bolt.

41.Wrap the Low Cable (89) around a 3 1/2” Pulley (82). Attach the Pulley to the bracket on the Weight Base (14) with a 3/8” x 2” Bolt (50) and a 3/8” Nylon Locknut (42).

18

38
15
87
40
61
20	92
39
	Row Tube
	89
	97
	79
	50
	Ball
40
42	89
83
81	57
14
41
	89
50
	82
	42
14