Weider 831.159822 user manual

33.Locate the Leg Lever Cable (96). Route the eyelet end of the Cable through the Right Leg (73) and attach it to the Leg Lever (4) with an M8 x 20mm Shoulder Bolt (78) and an M8 Nylon Locknut (71).

34.Attach a 90mm Pulley (38) inside the Right Leg (73) with an M10 x 70mm Bolt (100), two M10 Washers (50), two 13mm Spacers (34), and an M10 Nylon Locknut (70).

35.Route the Leg Lever Cable (96) through the Right Upright (6) and under a 90mm Pulley (38). Attach the Pulley inside the Upright with an M10 x 70mm Bolt (100), two M10 Washers (50), two 13mm Spacers (34), and an M10 Nylon Locknut (70).

36.Wrap the Leg Lever Cable (96) around a 90mm Pulley (38). Attach the Pulley and a Cable Trap

(91)to the second set of holes from the bottom of the indicated Double “U”-Bracket (56) with an

M10 x 50mm Bolt (62) and an M10 Nylon Locknut

(70).Be sure the Cable Trap is turned to hold the Cable in the groove of the Pulley.

33
4
71	73
96	78
34
70	73	38
50
	34
		50
		34
		100
35		70
		50 34
	6	38
	96
		34
	50
		100
36
	70	56
	91
		62
	38
		96

15