Weider 831.159822 user manual

41.Wrap the Low Cable (47) around a 90mm Pulley (38). Attach the Pulley to the indicated bracket on the Left Base (2) with an M10 x 45mm Bolt (66) and an M10 Nylon Locknut (70).

42.Wrap the Low Cable (47) around a 90mm Pulley (38). Attach the Pulley to the indicated bracket on the Left Base (2) with an M10 x 45mm Bolt (66) and an M10 Nylon Locknut (70).

43.Wrap the Low Cable (47) around a 90mm Pulley (38). Attach the Pulley and a Cable Trap (91) to the second set of holes from the bottom of the indicated Double “U”-Bracket (56) with an M10 x 50mm Bolt (62) and an M10 Nylon Locknut (70).

Be sure the Cable Trap is turned to hold the Cable in the groove of the Pulley.

44.Wrap the Low Cable (47) around a 90mm Pulley (38). Attach the Pulley to the indicated bracket on the Right Base (1) with an M10 x 45mm Bolt (66) and an M10 Nylon Locknut (70).

41
47
38
		70
66	2
42
47		38
2
66		70
43
70		91
	56
	62	38
		47
44
	47
	38
70		66
1

17