25.Route the Leg Press Cable (95) through the Left Leg (36) and the Left Upright (7) as shown. Wrap the Cable around a 90mm Pulley (38). Attach the Pulley inside the Upright with an M10 x 70mm Bolt (100), two M10 Washers (50), two 13mm Spacers (34), and an M10 Nylon Locknut (70).
26.Wrap the Leg Press Cable (95) around a 90mm Pulley (38). Attach the Pulley inside the bracket on the Left Top Frame (3) with an M10 x 45mm Bolt (66) and an M10 Nylon Locknut (70).
27.Attach the end of the Leg Press Cable (95) to the
Note: Do not completely tighten the Locknut; it should be threaded only two turns onto the end of the Cable, as shown in the inset draw- ing.
28.Locate the Butterfly Cable (46). Attach the Cable to the Pivot Bracket (48) on the Left Butterfly Arm (10) with an M8 x 20mm Shoulder Bolt (78) and an M8 Nylon Locknut (71).
25 |
|
|
38 |
| 70 |
34 |
| |
| 50 | |
50 |
|
|
34 |
|
|
7 |
|
|
95 |
|
|
100 | 36 | |
26 |
|
|
3 |
|
|
|
| 70 |
66 |
|
|
38 |
|
|
95 |
|
|
27 |
|
|
95 |
|
|
| 95 | |
26 |
|
|
85 |
| 26 |
|
| |
28 |
|
|
| 71 |
|
|
| 46 |
10 | 48 | 78 |
|
| |
13
