Weider WEBE0939.1 Locknuts yet, Do not overtighten the Locknut the Leg, Lever must pivot easily

3. Attach the Front Leg (8) to the Frame (2) with two	3
M8 x 43mm Bolts (39), four M8 Washers (16),					2
and two M8 Locknuts (17); do not tighten the		39		16
Locknuts yet.					16
				16
		8			17
4. Attach the Frame (2) to the Crossbar (3) with three	4				18
M8 x 55mm Bolts (18), two M8 Washers (16), and						16	17
three M8 Locknuts (17); do not tightenthe
Locknuts yet.				2
							3
				18	17
5. Apply some of the included grease to an M10 x	5			32	Grease
63mm Bolt (32).
Attach the Leg Lever (4) to the Front Leg (8) with			4
the M10 x 63mm Bolt (32) and an M10 Locknut						33
(33). Do not overtighten the Locknut; the Leg
Lever must pivot easily.					8
6. Insert a Long Pad Tube (10) into a hole in the	6
Leg Lever (4). Slide two Foam Pads (23) onto the		23	10	4
Long Pad Tube.
Attach the other Long Pad Tube (10) and two	23
Foam Pads (23) in the same way.			23
					10
							23
	7