FRAME ASSEMBLY
4.Insert the two 5/16Ó x 2 3/4Ó Bolts (55) through the two indicated 5/16Ó Washers (20), and into the Curl Post (9).
Slide the Seat Frame (8) onto the ends of the Bolts (55) and secure the Seat Frame with two 5/16Ó Nylon Locknuts (40).
Press a 2Ó Square Inner Cap (56) into the top of Curl Post (9).
5.Slide the Curl Post (9) onto the indicated 5/16Ó x 2 1/2Ó Carriage Bolts (49) in the Press Base (13). Hand tighten two 5/16Ó Nylon Locknuts (40) onto the Carriage Bolts.
Attach the Seat Frame (8) to the Press Upright (4) with two 5/16Ó x 2 3/4Ó Bolts (55), two 5/16Ó Washers (20), and two 5/16Ó Nylon Locknuts (40). Do not tighten the Nylon
Locknuts yet.
6.Insert two Weight Guides (23) into one of the brackets on the Weight Base (14). Attach the lower end of the Weight Guides with a 5/16Ó x 6Ó Bolt (67), two 1/2Ó x 3/4Ó Spacers (69), and a 5/16Ó Nylon Locknut (40). Do not over tighten the Nylon Locknut.
Attach the other Weight Guides (23) to the other bracket in the same manner.
7.Slide a Weight Bumper (27) onto each of the Weight Guides (23).
Slide eight Weights (89) onto each set of Weight Guides (23). Be sure that the pin grooves are on the indicated side of each stack of Weights.
7
4 |
|
|
|
|
| 40 |
|
|
|
| 56 |
| 8 |
| 20 |
|
|
| |
|
| 40 | 55 |
|
| 9 | |
|
|
| |
|
|
| 20 |
5 | 20 | 40 |
|
55 |
| 8 |
|
20 |
|
|
|
|
| 40 |
|
|
|
| 9 |
4 |
| 40 |
|
|
|
| |
|
|
| 40 |
|
| 13 |
|
|
| 49 |
|
6 |
|
|
|
|
| 23 | 23 |
|
|
| |
|
| 40 |
|
14 |
|
|
|
|
| 69 | 67 |
|
|
| |
7 |
|
| 89 |
|
|
| |
89 |
|
| Pin |
|
|
| |
|
|
| Grooves |
Pin |
|
|
|
Grooves |
|
|
|
27 |
| 27 |
|
|
|
| |
| 23 |
|
|
|
| 23 |
|
