8.Press a Weight Tube Bumper (26) into each Weight Tube (25).
Insert a Weight Tube (25) into each stack of Weights (89). Be sure that the pins on the
Weight Tubes are in the pin grooves in the upper Weights.
9.Lubricate the insides of the holes in the Top Weights (24) as shown. Slide a Top Weight onto each set of Weight Guides (23).
FRAME ASSEMBLY
10.Attach the Top Frame (2) to the Ab Upright (1) with two 5/16Ó x 2 3/4Ó Bolts (55), two 5/16Ó Washers (20), and two 5/16Ó Nylon Locknuts (40). Do not tighten the Nylon Locknuts yet.
Attach the Butterfly Frame (3) to the Press Upright (4) with two 5/16Ó x 2 3/4Ó Bolts (55), two 5/16Ó Washers (20), and two 5/16Ó Nylon Locknuts (40). Do not tighten the Nylon
Locknuts yet.
8 |
|
|
| 25 |
|
| 26 | |
| 89 | 89 |
|
| |
9 |
|
|
|
| Lubricate |
| 24 |
|
Lubricate |
| 23 |
|
| |
23 |
|
|
10 |
| 55 |
|
| |
|
| 20 |
| 55 | 20 |
|
| |
| 20 | 3 |
|
| |
2 |
|
|
1 | 40 | 4 |
40 | ||
8
