17.Route the Long Cable (41) around a
(46).Attach the Pulley and a Long Cable Trap
(43)to the bracket on the Left Arm (11) with a 3/8” x 2 1/2” Bolt (79) and a 3/8” Nylon Locknut (84).
Be sure that the Cable is in the groove of the Pulley and that the Cable Trap is positioned to hold the Cable in place.
18.Route the Long Cable (41) around a
(46).Attach the Pulley and a Long Cable Trap
(43)to the bracket on the Right Arm (12) with a 3/8” x 2 1/2” Bolt (79) and a 3/8” Nylon Locknut
(84).Be sure that the Cable is in the groove of the Pulley and that the Cable Trap is posi- tioned to hold the Cable in place.
19.Route the Long Cable (41) around the 3 1/2” Pulley (45) attached to the Pulley Bracket (51).
Be sure that the Cable is in the groove of the Pulley and that the Cable Trap (44) is turned to hold the Cable in place. Tighten the 3/8” Nylon Locknut (84).
Be sure that the 5/16” x 5” Bolt (not shown) is properly tightened and that the Pulley Bracket (51) can move freely.
20.Attach a 3 1/2” Pulley (45) and a Cable Trap (44) to the indicated hole in the Long
Route the Long Cable (41) between the 3 1/2” Pulley (45) and the Cable Trap (44). Be sure that the Cable is in the groove of the Pulley and that the Cable and Pulley move smoothly.
17 |
|
|
| 79 |
|
43 |
| |
46 |
|
|
Bracket |
|
|
41 |
|
|
84 |
| 11 |
|
| |
18 |
|
|
79 |
|
|
43 |
|
|
46 |
|
|
Bracket |
|
|
12 |
|
|
41 |
|
|
84 |
|
|
19 |
| 51 |
|
| |
41 | 45 | 44 |
84 |
| |
20 |
|
|
41 |
| |
45 |
| |
44 |
|
|
74 |
|
|
| 50 | 84 |
|
| |
11
